2011-2019 DURAMAX 60″ TRACTION BAR KIT (RCLB/CCSB/ECSB)

$859.00

***For Regular Cab Long Bed, Extended Cab Short Bed and Crew Cab Short Bed Models***
-LIFETIME WARRANTY against bending or breaking (to original purchaser)
-60″ Heavy Duty Bars
-Poly Bushings
-RockJock Johnny Joints
-Frame side weld on mounts
-Axle side bolt on mounts
-Grade 8 Hardware
-Powder Coating with epoxy primer base coat

Powder Coat Color Guide

SKU: WCF100851 Categories: ,  Brands:
Description

***This kit includes 60″ long bars for Regular Cab Long Bed, Extended Cab Short Bed and Crew Cab Short Bed Models***

***This kit is for 2011-2019 GM HD Trucks***

If you have Extended Cab Long Bed or Crew Cab Long Bed truck use part number WCF100853. If you have a Lift Kit and your U-Bolts face up instead of down like factory, use Traction Bar Kit WCF100855.

If you have a Lift Kit and your REAR lift Block is taller than 5″ or your total lift height is 6″ or greater, use part number WCF100853. If your truck is on a big lift, please measure from your axle mounting point to your frame mounting point to ensure the bar length will work properly for your application before placing your order.

Built in house at WCFab carrying a LIFETIME WARRANTY against bending or breaking (to original purchaser). Traction bars are a necessary upgrade when increasing the horsepower on your diesel truck to prevent the axle from twisting which can lead to broken u-joints, driveshafts, and even twisted axle housings. Our traction bar brackets bolt on to the bottom of the axle tube via the axle u-bolts and weld to the frame on the front end. We use a high quality RockJock rebuild-able and grease-able “Johnny Joint” heim connection at the frame to allow for adjustment of torsion on the axle or if you raise/lower the rear of your truck. At the axle connection we use a heavy duty Poly Urethane Bushing for decreased noise and vibration which is common complaint if a solid heim is used on both ends. Grade 8 hardware connects the bars to the mounts on the frame and axle. We complete our traction bar kit with our professional in house powder coat process in your color choice and comes standard with a epoxy Primer base coat before the final color which increases corrosion resistance by more than ten times compared to just your standard powder single coat application.

Additional information
Brand

WC Fab

Brand

Brand

WC Fab

Vehicle Fitment
Make Model Engine Year
Chevy Duramax 6.6 2011 - 2019
GMC Duramax 6.6 2011 - 2019
Get $10 Off Your First Purchase!
Enter your name and email address and we'll send you a $10 off coupon for your first order!
Thanks for signing up. You must confirm your email address before we can send you. Please check your email and follow the instructions.
We respect your privacy. Your information is safe and will never be shared.
Don't miss out. Subscribe today.
×
×
Please verify the fitment of this product before ordering. All Electronic Items are Non-Refundable.
Don't miss out. Subscribe today.
×
×
This product is designed and manufactured for use only on competition motor vehicles participating in sanctioned closed-course, off-road, competitive Racing. Use of this product on Motor Vehicles that are licensed and registered to drive on public roads and highways is prohibited. By accepting this you agree that this product will not be used on a registered motor vehicle for highway use. Also, agreeing to this you take for responsibility for your actions and not hold Blood Diamond Motorsports liable for unlawful use of this product.
Don't miss out. Subscribe today.
×
×