EAS Shift-On-The-Fly (SOTF) Accessory 2011-2016 Chevy/GMC 6.6L LML Duramax – 98653

$138.95

Here is how it works:

1. The EAS Shift-on-the-fly accessory, connected to your Insight CTS2, will control your tune levels for vehicles requiring a switch to control the power levels.
2. Switching occurs by changing voltages between 1v, 2v, 3v, 4v, 5v. Most custom-tuned vehicles run within these parameters.
3. Wire or plug the switch in just as you would your normal Shift-On-The-Fly (SOTF) or Driver-Selectable-Tuning (DST) switch. Then, flash the tune into your vehicle that enables the SOTF/DST functions.
4. Enjoy changing your power levels right through the Insight CS2 or CTS2 screen!

Note:

The Duramax EAS accessory plugs into the ECM. Only controls tuning levels that change voltage resistance through ECM pins. Also, must be plugged in as instructed with ground and signal wires.

SKU: 98653 Categories: , ,  Brand:
Description

Edges all-new EAS Shift-On-The-Fly (SOTF) allows you to change custom tunes* on the fly utilizing the Insight CS2 or CTS2. The EAS SOTF part numbers cover the 2011-2016 Duramax, 2010-2018 Cummins, and 2011-2019 Power Stroke. Customers can now change tunes right on the screen! Many companies use a voltage signal to change between their 5 tune levels, when tuned with custom tuning software. Instead of drilling a hole in the dash, add the EAS SOTF accessory to an Insight monitor to control custom tunes* while driving down the road.

 

Here is how it works:

 

1. The EAS Shift-on-the-fly accessory, connected to your Insight CTS2/CTS3, will control your tune levels for vehicles requiring a switch to control the power levels.
2. Switching occurs by changing voltages between 1v, 2v, 3v, 4v, 5v. Most custom-tuned vehicles run within these parameters.
3. Wire or plug the switch in just as you would your normal Shift-On-The-Fly (SOTF) or Driver-Selectable-Tuning (DST) switch. Then, flash the tune into your vehicle that enables the SOTF/DST functions.
4. Enjoy changing your power levels right through the Insight CS2 or CTS2 screen!

 

Note:

 

The Duramax EAS accessory plugs into the ECM. Only controls tuning levels that change voltage resistance through ECM pins. Also, must be plugged in as instructed with ground and signal wires.

 

*Custom tunes created by 3rd party tuners and/or 3rd party custom-tuning software have no affiliation, approval or endorsement by Powerteq. Powerteq is not liable in any way for tunes created by 3rd party companies or 3rd party tuning software. The Powerteq EAS SOTF accessory is designed to replace a mechanical switch to enable changing power levels with the touch of a button on the Insight monitor.

Additional information
Brand

Edge

Brand

Brand

Edge

Vehicle Fitment
Make Model Engine Year
Chevy Duramax 6.6 2011 - 2016
GMC Duramax 6.6 2011 - 2016
Get $10 Off Your First Purchase!
Enter your name and email address and we'll send you a $10 off coupon for your first order!
Thanks for signing up. You must confirm your email address before we can send you. Please check your email and follow the instructions.
We respect your privacy. Your information is safe and will never be shared.
Don't miss out. Subscribe today.
×
×
Please verify the fitment of this product before ordering. All Electronic Items are Non-Refundable.
Don't miss out. Subscribe today.
×
×
This product is designed and manufactured for use only on competition motor vehicles participating in sanctioned closed-course, off-road, competitive Racing. Use of this product on Motor Vehicles that are licensed and registered to drive on public roads and highways is prohibited. By accepting this you agree that this product will not be used on a registered motor vehicle for highway use. Also, agreeing to this you take for responsibility for your actions and not hold Blood Diamond Motorsports liable for unlawful use of this product.
Don't miss out. Subscribe today.
×
×