2013-2018 6.7 CUMMINS S300 HIGH MOUNT 2ND GEN SWAP KIT
-4″ Down Pipe (Mates to Exhaust System V-band)
-Dry Air Filter
-Outerwear’s Pre-Filter Cover
-Stainless Oil Feed and Drain Line with Fittings
-3″ Hot Side Inter cooler Pipe (V-band style connection)
-1/2″ T4 Spacer plate
-Coolant Lines and Fittings, (Stand pipe removal fitting)
-Crank Case Breather Kit
This kit will allow you to install an S300SXE based Turbo on your 2013-2018 6.7 Cummins with a 2nd Gen Style Exhaust Manifold (Sold Separate). Kit includes all components needed to install the turbo. We mount the manifold pointing up which allows for a quick and simple down pipe install- no cutting of your exhaust system required! Our down pipe connects to the v-band flange on the exhaust pipe just as your factory turbo/cast elbow did. NO Bending of AC lines is required. OEM Coolant tank can be used, we do offer a fabricated aluminum tank as an option in the kit. Designed to be used with 2nd Gen Style ATS 3 piece or Steed Speed exhaust Manifold. If you are not purchasing the turbo and manifold from us you must specify the brand of turbo and manifold you are using, some brands may require that you send the parts in to us for the kit to be built.
**Hot side Intercooler pipe uses a v-band connection at turbo. The kit INCLUDES welding of V-band flange to the SXE turbo cover. If you are not purchasing turbo from us, it WILL need to be sent in to have flange welded onto the outlet.
**Our down pipe is HX40 style flange connection at the turbo exhaust housing as this style offers the best seal, alignment, and easiest install. If you are not purchasing the turbo from us you will need to make sure your exhaust housing is machined to HX40 style outlet flange!